Swirlway 09-2CECMRC Variable-Speed Pump & Control Replacement Kit
Swirlway 09-2CECMRC Variable-Speed Pump & Control Replacement Kit
✔ FREE Shipping in the USA on Orders $100+
✔ Same-Day Shipping Available on Most Orders
✔ Expert Help Identifying the Right Part
✔ Real Technical Support Before & After the Sale
✔ Trusted by Homeowners, Plumbers & Contractors
Couldn't load pickup availability
Complete Your Repair
Most customers add these items when replacing a whirlpool pump.
Replace the discontinued Swirlway / ITT Hydro Air 09-2CECMRC variable-speed whirlpool control system with a complete modern retrofit from Whirly Bros. This package replaces the aging pump and obsolete controls together with a new 120V variable-speed pump, Touchstone electronic controller, and a clean three-button tub-mounted keypad.
Instead of connecting a new control to an aging original pump, this kit replaces the pump, controller, control cable, and keypad as one matched system. The modern keypad provides pump on/off, adjustable variable speed, and control for an optional LED light.
Complete 09-2CECMRC replacement system
The original 09-2CECMRC control was manufactured for older Swirlway variable-speed whirlpool systems and is now discontinued. This Whirly Bros retrofit restores variable-speed jet operation without relying on the original control box, keypad, or pump electronics.
What’s included
- 120V, 8.5A variable-speed whirlpool pump
- Touchstone variable-speed electronic control box
- Modern white three-button tub-mounted keypad
- Pump union fitting
- Installation instructions
Three-button keypad operation
- Pump button: Turns the whirlpool pump on or off and starts the automatic 30-minute operating cycle.
- Variable-speed control: Increase or decrease pump speed to adjust jet intensity.
- Light button: Operates a compatible optional LED chromatherapy light when the light and cable are installed.
Optional LED light
A compatible LED tub light and connecting cable can be included for an additional cost. The optional lighting system provides multiple color selections and a color-changing mode. Contact Whirly Bros before ordering if you would like the light added to your package.
Modern appearance
The white rectangular keypad provides a cleaner, updated appearance than the original control. Its outer trim is approximately 2-1/8" × 3" and is intended to cover the existing keypad opening when adequate flat mounting space is available.
Technical specifications
- Original control reference: 09-2CECMRC
- Original manufacturer reference: ITT Hydro Air / Swirlway
- Electrical: 120V, 60Hz
- Pump: 8.5A variable-speed whirlpool pump
- Control system: Touchstone variable-speed electronic controller
- Keypad: White three-button tub-mounted keypad
- Automatic timer: 30 minutes
- Lighting: Optional LED light and cable available at additional cost
Important compatibility information
Confirm the 09-2CECMRC number on the original control-box label and verify the pump voltage, amperage, plumbing connections, discharge orientation, keypad opening, and available mounting space before ordering.
The retrofit uses its own new controller and keypad. The original electronic keypad and original water-level sensor are not reused.
Send clear photos of the original control-box label, pump label, plumbing connections, keypad, and equipment area to Whirly Bros for compatibility review.
Installation notes
- The system must be connected to a properly protected 120V GFCI circuit.
- Align the pump union squarely and hand-tighten it. The O-ring makes the watertight seal; do not apply thread sealant to union threads.
- Confirm sufficient flat space around the existing keypad opening before installation.
- Professional installation is recommended when electrical or plumbing modifications are required.
Call or text (951) 897-1878 for compatibility assistance or to add the optional LED light and cable.
Compatibility notice: Swirlway® and ITT Hydro Air® names and part numbers are used solely to identify the original equipment application. This aftermarket retrofit is not manufactured, sponsored, or endorsed by the original equipment manufacturer.
Share
